Product manual

National standard number: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4

American label number: GR1, GR2, GR3, GR5, GR7, GR12

Russian label number: BT1-00, BT1-0, BT1-2, etc.

Standard

1: GB 228 metal tensile test method
2: GB/T 3620.1 Titanium and titanium alloy grades and chemical composition
3: GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition tolerance
4: GB 4698 sponge titanium, titanium and iron alloy chemical analysis method

Manufacturing process

Hot forging is a forging process performed above the metal recrystallization temperature.
Hot rolling is a rolling process performed at a temperature higher than the recrystallization temperature.
Cold rolling: A rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: a metal heat treatment process that slowly heats the metal to a certain temperature, keeps it for a sufficient time, and then cools it at an appropriate speed (usually slow cooling, sometimes controlled cooling).
Pickling: The parts are immersed in an aqueous solution such as sulfuric acid to remove oxides and other films on the metal surface. It is the pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes 　 　

Features

1. The oxide film on the surface of the titanium seed plate is equivalent to a good durable wear-resistant hair separating agent. The use of the titanium seed plate saves the separating agent, makes the electrode plate easy to peel, and eliminates the pre-treatment process of the seed plate. The board is half lighter than the copper seed board.
2. The service life of the titanium seed plate is more than 3 times that of the copper seed plate, and can reach 10***20 years according to operating conditions
3. The electrolytic copper produced from the titanium seed plate has a dense crystal structure, a smooth surface and high quality.
4. Since the titanium seed plate does not need to be coated with a separating agent, it can avoid the pollution of copper electrolyte.
5. Increase the production capacity and reduce the production cost of electrolytic copper, thereby having better economic benefits.